Help in creating T-51B from paper

To begin with, download the *pdo format file, it is here (link directly to download, when the transition should immediately start uploading), files with the same format opens Pepakura Viewer 3 (download from deposit and turbobit). Now we will analyze Pepakuru
Here is Pepacura herself

what is in it: button File, I think there is no need to explain, everything is so simple.
View, Most of the functions that are there in the panel, so we don’t analyze it, I just advise you to remove all the checkmarks there
Setting, There is one important point, Print Setting, Printing, I think you will figure it out, since each has its own.
Help, what is it and why I think it is not necessary to explain

Now go to the panel that is under these buttons.
What is there: The folder badge, Opening the file as the name implies
Cube, Changing the coloring of printouts and model, in our case, will change gray to white
Brush, We do not need it, it seems like it does not work in our case
Three digits, under them a piece of paper, This button for numbering all edges of the parts, I strongly do not recommend pressing it, let it be turned off
Once a cube, but a little different, This is for the appearance of the slots between the gluing places on the model
Bulb, we do not need something important under it
Leaf P.1, Page numbness, it is not required to press
Comment, Do not press, we will not need
Divorce key, color settings
Another cube, serves to return the model and drawings to the original position, press as much as you want
Printer, Printing
Two sheets, Click and understand
I in a circle, We are not required, and I did not understand what it is

Now let’s move on to https://gamblingdata.net/casinos/pub-casino/ the assembly, but for starters I will say what the meaning of Papakura is, firstly, the three -dimensional model can be seen in it, it can be twisted, shredded, selected the element and so on. The most important plus is that when it is hung on the edge of the part, a red arrow shows where this part should be glued, be attentive, the arrow moves away from a certain tongue, it needs to be glued exactly where the arrow shows, you will be mistaken. With theory, everything seems to move on to practice.

As I wrote earlier, first, collect this model

, Download here
There is nothing difficult in it, so I won’t describe it, I’ll go right away for what you came here.

So you printed all the details if you have a special knife with a set of blades (I don’t remember what it is called, but sometimes used in schools, I’m not talking about the one that with a retractable blade, but which has several types of blades and you can change them), then cut them out, if not, then find two types of scissors, other small ones, I warn you in advance, cut out for a long time, it is difficult to cut out for a long time and difficult. I advise you to cut out all the details at once, but see that they would not be lost.

So, glue. I glued PVA and I advise you, only know the measure, we will soak a lot of glue, and it will be easy to break.
I advise to start with this place

There are almost no difficulties in gluing most details, just be careful, more closely, and look at Pepakura more often, also see that the tongue is stuck evenly, the dimensions are perfect, everything is a millimeter for a millimeter.
Let’s move on to difficult places, first take three stationery clips and straighten them so that they would turn out to be different long, this will help you glue where the finger does not crawl.
Under the difficult I think this